41z module "NO LIBRARY"

[Sylvain Cote]

(06-26-2015 11:25 AM)Ángel Martin Wrote:  Yes you need the Library#4 installed (i.e. plugged) into port-4; I don't know how that'll be done on i41CX but I assume there is a way to do it?

Very easy,
a) start the i41CX+ application
b) tag in the LCD region (to go to the configuration display)
c) press the small gear at the right bottom (to go to the setting display)
d) activate the "use module page"
e) press done (to go back to the configuration display)
-> at this point you should now see the module pages screen with the current pages used and by what
f) press one of the four module slot at the top (to activate the page/module selection display)
g) for each module you want to activate
-> select the page at the left
-> then the module you want at that place at the right
-> the press "Select"
h) when complete then press "Done" (to go back to the configuration display)
i) press the top middle to go back to the calculator display
Voilà c'est fini! 8-)
Sylvain