CP/M on HP-87
|
07-13-2015, 06:41 PM
Post: #4
|
|||
|
|||
RE: CP/M on HP-87
22DISK is a shareware tool for reading/writing CP/M disks under MS-DOS, or Win 9x (only in a full-screen DOS box, <Alt>-<Enter>.)
You can download it from http://www.cpm.z80.de/download/22dsk142.zip Native support is only for HP 86, 87, 125 - DSDD 48 tpi 5.25" floppy disk (HP1 diskette type). The files I got from Stephen allow to extend the support to HP 86, 87, 125 - SSDD 48 tpi 3.5" floppy disk (HP2 diskette type). There is a special HP CP/M boot disk that contains 3 files: Autost, CP/M, and CP/MSYS. CP/MSYS is a large file on the disk that contains the CP/M file system and the basic files normally expected in a bare bones CP/M system. Apparently the HP is using the CP/MSYS file as an IMG file, such as linux does, allowing a file to be attached as a device and accessed as a drive. So, yes, with a tool like 22DISK, extended, you can access that IMG file, and list, delete, copy from/to DOS any text of binary CP/M-80 file. I was able to copy and execute programs like Mbasic (Microsoft Basic), TP 1.0 (Turbo Pascal), MP (Multiplan) and others, downloaded from any site that has CP/M-80 programs. Of course, maybe, there are some limitations, but I could't find any for now. Not sure about graphics CP/M-80 programs. I didn't test that feature yet. As you said, that hugely increase the amount of CP/M software for the HP 86/87... I think that CP/M for the HP 86/87 was underestimate until now. Btw, let me know if you need a copy of the CP/M boot disk rev B 3.5" in TD0 format, as on the hpmuseum.net there is only the 5.25" format to download. Have fun with CP/M for the HP 86/87. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
CP/M on HP-87 - gferluga - 07-12-2015, 07:41 AM
RE: CP/M on HP-87 - gferluga - 07-12-2015, 07:23 PM
RE: CP/M on HP-87 - Michael Fehlhammer - 07-13-2015, 09:42 AM
RE: CP/M on HP-87 - gferluga - 07-13-2015 06:41 PM
RE: CP/M on HP-87 - Michael Fehlhammer - 07-13-2015, 08:04 PM
RE: CP/M on HP-87 - Dave Frederickson - 07-13-2015, 08:20 PM
RE: CP/M on HP-87 - Michael Fehlhammer - 07-13-2015, 08:39 PM
RE: CP/M on HP-87 - Dave Frederickson - 07-13-2015, 09:05 PM
|
User(s) browsing this thread: 4 Guest(s)