Post Reply 
WP-34S pre-made
07-27-2015, 01:53 AM
Post: #6
RE: WP-34S pre-made
(06-14-2015 03:59 PM)Den Belillo (Martinez Ca.) Wrote:  Kevin;

I got one of Eric's "blemished" 34s units as a door prize at the last HHC in Reno. I'll believe him that it has a problem somewhere but I sure can't find it.

About his response time; He may have schedualed this time to be away on vacation or he might have known he'd be working too much to do this right now. I can swear that this is not the only iron he has in the fire ;-)

BTW: If you do get one from him, you can also buy a spare keyboard overlay in case yours ever wears out (I've used one on a 20b for 3 years and it's fine) or if you find a 30b someday and want to try flashing your own.

I have only ordered the overlays from Eric, but I sure can vouch for him. Sometimes things take awhile, but like a lot of folks in this subspecialty area he is a one-man act and does other stuff to.

I am not good with tech stuff from the hardware side, but even I have had no trouble flashing my own. If you can still get the cable (Gene Wright used to supply them, but probably not for ages) and the serial-USB converter that Eric sells (I tried another and no dice), it is really quite easy.

Les
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
WP-34S pre-made - kevinvinv - 06-14-2015, 02:53 PM
RE: WP-34S pre-made - striegel - 06-14-2015, 03:18 PM
RE: WP-34S pre-made - kevinvinv - 06-14-2015, 03:26 PM
RE: WP-34S pre-made - d b - 06-14-2015, 03:59 PM
RE: WP-34S pre-made - lcwright1964 - 07-27-2015 01:53 AM
RE: WP-34S pre-made - kevinvinv - 06-14-2015, 04:16 PM
RE: WP-34S pre-made - ggauny@live.fr - 11-19-2015, 06:21 PM
RE: WP-34S pre-made - 2far - 11-22-2015, 11:26 PM
RE: WP-34S pre-made - 2far - 11-23-2015, 03:28 PM
RE: WP-34S pre-made - 2far - 12-06-2015, 05:50 AM
RE: WP-34S pre-made - emece67 - 12-06-2015, 12:06 PM
RE: WP-34S pre-made - walter b - 12-06-2015, 01:14 PM
RE: WP-34S pre-made - d b - 12-06-2015, 04:44 PM
RE: WP-34S pre-made - emece67 - 12-06-2015, 08:42 PM



User(s) browsing this thread: 2 Guest(s)