NP-25

[jjohnson873]

(10-02-2015 03:08 AM)sjthomas Wrote:  Hi Jim,

Loving the NP-25's.

Is there a way to do a master reset to return it to it's default state? I'm trying to return the start-up message to its default state to get those apostrophe-like characters.

Steve T.

Hi Steve...if you hold down the "f" key when you turn on the NP25, you should get the apostrophe message scroll across the display. You can always edit that message and put in your own message by using the "EDIT" mode. You get into edit mode by holding down the GTO key and turning on the NP25. Then you can use the 0-9 keys to edit. Repeated presses of each of the keys get different alphanumeric characters. The R/S key advances to the next character. Keep pressing the R/S key until you reach the end and it will save your new message.

Btw...I should have your other NP25 assembled and tested by tonight and in the mail to you by Saturday. I had to wait for more IC's to come in to finish it up.