[WP34s] Help Flashing!
|
11-02-2015, 11:04 PM
Post: #2
|
|||
|
|||
RE: [WP34s] Help Flashing!
Many have reported that the software environment is pretty critical for a successful
flashing operation. The flashing occurs at 115200 baud, so the timing is more troublesome than the program/data transfer between the emulator and the calculator which takes place at 9600 baud. Many have reported that linux/wine programming and Mac programming are unsuccessful. The most successful combination is Windows 7 with MySamba.exe I have not heard any reports of how successful MySamba is under Windows 10. If you can get your hands on an older Windows 7 machine, you might have better luck. Remember to use the sequence Reset (on the back), On button (on the front) then transfer the file with MySamba. Also if you don't have the crystal use the calc.bin or calc_full.bin not the calc_xtal.bin or calc_xtal_full.bin Best of luck, Barry |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[WP34s] Help Flashing! - jayemel - 11-02-2015, 07:13 PM
RE: [WP34s] Help Flashing! - BarryMead - 11-02-2015 11:04 PM
RE: [WP34s] Help Flashing! - jayemel - 11-02-2015, 11:30 PM
RE: [WP34s] Help Flashing! - walter b - 11-03-2015, 12:20 AM
RE: [WP34s] Help Flashing! - jayemel - 11-03-2015, 08:36 AM
RE: [WP34s] Help Flashing! - jayemel - 11-03-2015, 02:07 PM
RE: [WP34s] Help Flashing! - walter b - 11-03-2015, 03:26 PM
RE: [WP34s] Help Flashing! - jayemel - 11-03-2015, 03:53 PM
RE: [WP34s] Help Flashing! - walter b - 11-03-2015, 04:36 PM
RE: [WP34s] Help Flashing! - jayemel - 11-03-2015, 04:48 PM
RE: [WP34s] Help Flashing! - emece67 - 11-03-2015, 05:06 PM
RE: [WP34s] Help Flashing! - matthiaspaul - 11-03-2015, 10:52 PM
|
User(s) browsing this thread: 7 Guest(s)