The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 795 - File: showthread.php PHP 7.4.33 (FreeBSD)
File Line Function
/showthread.php 795 errorHandler->error




HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP 32E repair

Post Reply 
HP 32E repair
11-11-2015, 10:09 AM (This post was last modified: 11-11-2015 10:22 AM by Harald.)
Post: #1
Harald Offline
Senior Member
 		Posts: 812
Joined: Dec 2013
HP 32E repair
Since Etienne now has my 32E (I hope he is enjoying it as much as I am enjyoing the 34C I got from him!) and I came accros a cheap non working one, I bought it :-)

I wonder what the problem is. When it sat for a while it very briefly turns on. Just enough to see 0.0000 light up for a few milliseconds. Then it goes dark. Initially I thought this would be a power supply issue. But the 6.5V and 5V display voltages are present. Has anybody experienced this problem as well? Any thoughts on what this might be? There is no excessive current drawn, just about 60mA, which appears about right for a spice with no LEDs lit.

Any thoughts appreciated,
Harald
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP 32E repair - Harald - 11-11-2015 10:09 AM
RE: HP 32E repair - Harald - 11-12-2015, 07:25 PM
RE: HP 32E repair - ElectroDuende - 11-13-2015, 07:26 AM
RE: HP 32E repair - rprosperi - 11-17-2015, 02:19 AM
RE: HP 32E repair - Harald - 11-17-2015, 08:17 AM
RE: HP 32E repair - rprosperi - 11-18-2015, 12:21 AM



User(s) browsing this thread: 4 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication