DM41L serial transfer help!

[Marcus von Cube]

(12-24-2015 08:19 PM)Dave Frederickson Wrote:  The SwissMicros calculators use a standard Mini-B USB cable without a converter.

And the console is just Putty, not a windows command prompt of some sort. So the sequence is:

1. Install the USB drivers
2. Connect the DM calculator to the USB cable and the USB cable to some USB port on your PC
3. Find out the COM port name (use device manager)
4. Set-up Putty in serial mode, using the COM port from the previous step
5. Turn on the calculator with the C button held down