HP Forums / Not HP Calculators / Not quite HP Calculators - but related v / DM41L at work

Post Reply 
DM41L at work
01-07-2016, 06:45 PM
Post: #30
Alex Liggett Offline
Junior Member
 		Posts: 13
Joined: Dec 2015
RE: DM41L at work
(01-06-2016 08:09 AM)Paul Dale Wrote:  I don't remember height limit, just that there is an artificial limit.

The velocity limit is supersonic from memory which airliners can never reach, at least not without crashing.


- Pauli
Interesting. According to the ever-reliable Wikipedia the limit is 1000kts at an altitude of 18km or more, to prevent the use of C/A code receivers in ballistic missiles.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
DM41L at work - Geoff Quickfall - 01-04-2016, 01:02 PM
RE: DM41L at work - Massimo Gnerucci - 01-04-2016, 07:53 PM
RE: DM41L at work - Jlouis - 01-04-2016, 09:38 PM
RE: DM41L at work - vk6ti - 01-05-2016, 01:25 AM
RE: DM41L at work - Sanjeev Visvanatha - 01-05-2016, 12:54 PM
RE: DM41L at work - walter b - 01-05-2016, 01:23 PM
RE: DM41L at work - sa-penguin - 01-06-2016, 06:44 AM
RE: DM41L at work - Chasfield - 01-05-2016, 05:31 PM
RE: DM41L at work - Paul Dale - 01-06-2016, 06:54 AM
RE: DM41L at work - walter b - 01-06-2016, 07:21 AM
RE: DM41L at work - Harald - 01-06-2016, 09:41 AM
RE: DM41L at work - Maximilian Hohmann - 01-03-2017, 04:55 PM
RE: DM41L at work - HrastProgrammer - 01-06-2016, 07:06 AM
RE: DM41L at work - Paul Dale - 01-06-2016, 08:09 AM
RE: DM41L at work - Didier Lachieze - 01-06-2016, 08:45 AM
RE: DM41L at work - Geoff Quickfall - 01-06-2016, 08:55 AM
RE: DM41L at work - Alex Liggett - 01-07-2016 06:45 PM
RE: DM41L at work - Geoff Quickfall - 01-06-2016, 08:26 AM
RE: DM41L at work - HrastProgrammer - 01-06-2016, 08:53 AM
RE: DM41L at work - Sanjeev Visvanatha - 01-06-2016, 01:02 PM
RE: DM41L at work - Geoff Quickfall - 01-06-2016, 08:49 AM
RE: DM41L at work - Geoff Quickfall - 01-07-2016, 08:29 PM
RE: DM41L at work - Guenter Schink - 01-07-2016, 11:55 PM
RE: DM41L at work - Geoff Quickfall - 01-08-2016, 12:15 AM
RE: DM41L at work - Guenter Schink - 01-08-2016, 10:55 PM
RE: DM41L at work - Soroban - 01-19-2016, 08:43 PM
RE: DM41L at work - IVIAX - 01-01-2017, 11:41 AM
RE: DM41L at work - grsbanks - 02-16-2018, 04:12 PM



User(s) browsing this thread: 7 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication