HP Forums / Not HP Calculators / Not quite HP Calculators - but related v / Took the plunge (DM-**L)

Post Reply 
Took the plunge (DM-**L)
02-19-2016, 04:40 PM (This post was last modified: 02-19-2016 04:42 PM by Massimo Gnerucci.)
Post: #4
Massimo Gnerucci Offline
Senior Member
 		Posts: 2,684
Joined: Dec 2013
RE: Took the plunge (DM-**L)
(02-19-2016 03:59 PM)Dave Britten Wrote:  
(02-19-2016 03:48 PM)lrdheat Wrote:  42L is what I'm waiting for!

I can't tell for sure, but it looks like the current dot matrix LCD they're using would handle at least the 131x16 of the 42S. They could just port Free42 to some embedded platform (perhaps the one already in use), slap it in the same shell with appropriate key labels, and I'd be in heaven.

I believe that Thomas didn't write Free42 with memory constrains in mind since it freely allocates memory as needed (at least that's what I remember from a few years ago).

And, please, not another landscape! ;)
Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Took the plunge (DM-**L) - Dave Britten - 02-19-2016, 03:15 PM
RE: Took the plunge (DM-**L) - lrdheat - 02-19-2016, 03:48 PM
RE: Took the plunge (DM-**L) - Massimo Gnerucci - 02-19-2016 04:40 PM
RE: Took the plunge (DM-**L) - Jlouis - 02-19-2016, 11:43 PM
RE: Took the plunge (DM-**L) - Harald - 02-20-2016, 11:13 AM
RE: Took the plunge (DM-**L) - Jlouis - 02-20-2016, 06:45 PM
RE: Took the plunge (DM-**L) - Jlouis - 02-20-2016, 11:04 PM
RE: Took the plunge (DM-**L) - Marcio - 02-20-2016, 12:16 AM
RE: Took the plunge (DM-**L) - rprosperi - 02-20-2016, 07:42 PM
RE: Took the plunge (DM-**L) - rprosperi - 02-21-2016, 12:26 AM
RE: Took the plunge (DM-**L) - rprosperi - 02-23-2016, 02:54 PM
archiving - axd1967 - 05-29-2016, 04:35 PM



User(s) browsing this thread: 3 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication