The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 795 - File: showthread.php PHP 7.4.33 (FreeBSD)
File Line Function
/showthread.php 795 errorHandler->error




HP Forums / HP Calculators (and very old HP Computers) / General Forum v / FRAM71 1MB Issue

Post Reply 
FRAM71 1MB Issue
02-21-2016, 10:28 PM (This post was last modified: 02-21-2016 10:31 PM by Dave Frederickson.)
Post: #1
Dave Frederickson Offline
Senior Member
 		Posts: 2,255
Joined: Dec 2013
FRAM71 1MB Issue
If you have a 1MB FRAM71, consider that the 16K built into the 71 is shared between the Top and Bottom configurations. If you have files loaded in :MAIN that reside in the built-in RAM in one configuration and clear memory in the other, guess what? The files in the first configuration are gone and the file chain is probably corrupt. My recommendation is to FREEPORT the built-in memory if you have a 1MB FRAM71. This goes for plug-in modules, as well, which can be used to transfer files between the Top and Bottom FRAM's.

Dave
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
FRAM71 1MB Issue - Dave Frederickson - 02-21-2016 10:28 PM
RE: FRAM71 1MB Issue - Sylvain Cote - 02-22-2016, 12:54 AM
RE: FRAM71 1MB Issue - Dave Frederickson - 02-22-2016, 02:00 AM



User(s) browsing this thread: 2 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication