HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP48 - InVision48 projector

Post Reply 
HP48 - InVision48 projector
02-17-2014, 07:57 PM
Post: #5
Han Offline
Senior Member
 		Posts: 1,882
Joined: Dec 2013
RE: HP48 - InVision48 projector
(02-16-2014 10:29 PM)Joe Horn Wrote:  One possibility: If you have this panel, and if the plug for the calculator actually has 10 pins, not 8, then you have the cable for an HP 49G, not an HP 48:

Was there never an back-ward compatible adapter for the HP48? I know they had such adapters for wire transfer. I take it these did not have proper LCD lines.
Graph 3D | QPI | SolveSys
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP48 - InVision48 projector - hughwong - 02-16-2014, 04:16 PM
RE: HP48 - InVision48 projector - Joe Horn - 02-16-2014, 10:29 PM
RE: HP48 - InVision48 projector - Han - 02-17-2014 07:57 PM
RE: HP48 - InVision48 projector - BruceH - 02-18-2014, 12:16 AM
RE: HP48 - InVision48 projector - Han - 02-18-2014, 08:13 PM
RE: HP48 - InVision48 projector - BruceH - 02-19-2014, 11:36 PM
RE: HP48 - InVision48 projector - Joe Horn - 02-18-2014, 12:57 PM
RE: HP48 - InVision48 projector - Han - 02-18-2014, 08:15 PM
RE: HP48 - InVision48 projector - BruceH - 02-16-2014, 11:18 PM
RE: HP48 - InVision48 projector - hughwong - 02-23-2014, 07:50 PM
RE: HP48 - InVision48 projector - hughwong - 03-06-2014, 05:36 PM
RE: HP48 - InVision48 projector - hughwong - 03-06-2014, 07:55 PM
RE: HP48 - InVision48 projector - Cricket - 03-12-2014, 04:53 AM



User(s) browsing this thread: 2 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication