Dead key on 35s
|
03-12-2016, 09:58 AM
Post: #1
|
|||
|
|||
Dead key on 35s
The + key of my 35s is dead. I try to figure out if it can be fixed.
I searched for tear down pictures but couldn't find anything about the keyboard. Does anybody know: - what technology is used? - is there a mean to fix it? The calculator was not very much used and I have no idea why a defect appeared on the key which is not totally dead but would only respond to very hard push. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Dead key on 35s - Tugdual - 03-12-2016 09:58 AM
RE: Dead key on 35s - Maximilian Hohmann - 03-12-2016, 11:41 AM
RE: Dead key on 35s - Csaba Tizedes - 03-12-2016, 12:48 PM
RE: Dead key on 35s - Thomas Radtke - 03-12-2016, 01:02 PM
RE: Dead key on 35s - Marcio - 03-12-2016, 01:12 PM
RE: Dead key on 35s - Tugdual - 03-12-2016, 02:46 PM
RE: Dead key on 35s - Massimo Gnerucci - 03-12-2016, 02:57 PM
RE: Dead key on 35s - Marcio - 03-12-2016, 03:02 PM
RE: Dead key on 35s - jebem - 03-12-2016, 08:14 PM
RE: Dead key on 35s - Tugdual - 03-12-2016, 09:07 PM
RE: Dead key on 35s - Marcio - 03-12-2016, 09:17 PM
RE: Dead key on 35s - jebem - 03-12-2016, 09:59 PM
RE: Dead key on 35s - Jlouis - 03-12-2016, 11:03 PM
RE: Dead key on 35s - Dan B - 03-12-2016, 06:11 PM
RE: Dead key on 35s - Marcio - 03-12-2016, 06:19 PM
RE: Dead key on 35s - Steve Simpkin - 03-12-2016, 07:21 PM
RE: Dead key on 35s - Massimo Gnerucci - 03-12-2016, 07:38 PM
RE: Dead key on 35s - Thomas Radtke - 03-12-2016, 09:39 PM
RE: Dead key on 35s - Marcio - 03-12-2016, 09:47 PM
RE: Dead key on 35s - Thomas Radtke - 03-12-2016, 10:08 PM
RE: Dead key on 35s - Marcio - 03-12-2016, 11:12 PM
RE: Dead key on 35s - Jlouis - 03-12-2016, 11:30 PM
RE: Dead key on 35s - Marcio - 03-16-2016, 08:17 PM
RE: Dead key on 35s - Tugdual - 03-17-2016, 06:17 AM
RE: Dead key on 35s - Thomas Radtke - 03-17-2016, 08:02 AM
RE: Dead key on 35s - Jeff O. - 03-17-2016, 05:10 PM
RE: Dead key on 35s - renif - 03-17-2016, 07:36 PM
RE: Dead key on 35s - Gerald H - 03-18-2016, 12:40 PM
|
User(s) browsing this thread: 2 Guest(s)