Post Reply 
HP-71B CMT Card Reader Memory Module Internal
04-01-2016, 09:48 AM (This post was last modified: 04-01-2016 09:54 AM by Garth Wilson.)
Post: #10
RE: HP-71B CMT Card Reader Memory Module Internal
(03-26-2016 12:09 AM)rprosperi Wrote:  Garth, It appears in the pics that the logo printed on the (RAM?) chip was deliberately scratched/scraped off, though somewehat legible on the middle unit. Does that look true seeing the chips live, or maybe it just appears that way in the photos?

The one on top is not legible, but the other two are HM62256...

Quote:I assume this is a 96KB module, right?

Yes. I used it for nearly 25 years with absolutely no trouble, and then something happened to it. Now I think it's just that there was some kind of configuration problem, and it might be fine if I just put it back together and put it back in. It had a lithium battery which I removed, not needing it to keep memory outside the 71 anyway, and not wanting the battery to leak. I don't remember if my 32KB front-port memory still has the battery in it or not.

When the FRAM is ready to go (and when the house quits needing repairs so I can afford the FRAM), I would like to get that. I use my 41cx every day though, whereas I seldom use my 71B's.

http://WilsonMinesCo.com  (Lots of HP-41 links at the bottom of the links page, at http://wilsonminesco.com/links.html#hp41 )
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: HP-71B CMT Card Reader Memory Module Internal - Garth Wilson - 04-01-2016 09:48 AM



User(s) browsing this thread: 3 Guest(s)