The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 795 - File: showthread.php PHP 7.4.33 (FreeBSD)
File Line Function
/showthread.php 795 errorHandler->error




HP Forums / HP Calculators (and very old HP Computers) / HP Prime v / How to revive Prime from sudden death

Post Reply 
How to revive Prime from sudden death
04-24-2016, 06:07 PM (This post was last modified: 04-24-2016 06:08 PM by René Franquinet.)
Post: #1
René Franquinet Offline
Junior Member
 		Posts: 31
Joined: Jun 2014
How to revive Prime from sudden death
Recently I tried to update my Prime to the latest version 2016.04.14 r10077 . As I had to do other things I have left the Conmnectivity Kit alone to do the update without interfering. I noticed however a number of error messages. Of course I have no log of these. I have waited till the end of the process and tried to reboot the Prime. Impossible.
I did the following things to get my Prime alive again:
- push a needle in the reset hole: no result
- apply the magical key tricks as mentioned in several threads: no result
- remove the battery for a couple of hours and replace it: no result
- feeding the Prime with and without battery and the USB-cable connected to a power outlet: no result.
The Prime also is not recognized by the Connectivity Kit . Maybe I did forget the ultimate trick?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
How to revive Prime from sudden death - René Franquinet - 04-24-2016 06:07 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication