HP Forums / HP Calculators (and very old HP Computers) / HP Prime v / HP Prime problem. Calculator resetting itself

Post Reply 
HP Prime problem. Calculator resetting itself
05-10-2016, 01:56 PM
Post: #12
Tim Wessman Offline
Senior Member
 		Posts: 2,293
Joined: Dec 2013
RE: HP Prime problem. Calculator resetting itself
(05-09-2016 03:30 PM)Cristian Arezzini Wrote:  Hi Infomach,
I performed the other steps from your previous reply (total Flash format from the Diagnostics page). Is that the same?
I also checked the FLASH blocks, and it appears I have three bad blocks: 0, 1 and 999. Could this be a problem?

Cristian

Flash blocks marked as "bad" are generally not an issue at all. Most flash chips have at least a few bad blocks.

The only time it really is a problem is when a block decides to fail during operation and wipe something out. This is normally quite rare though.
TW

Although I work for HP, the views and opinions I post here are my own.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: HP Prime problem. Calculator resetting itself - Tim Wessman - 05-10-2016 01:56 PM



User(s) browsing this thread: 4 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication