Wanted: HP-46 or 81 Printer

[damaltor]

I know a german seller who might be able to help you guys out. He sells gears and small metal bushings to put together two gears into one double-gear. Example:

Use this gear:
http://www.steingraeber-modelle.de/Zahnr...05868_4207
With this gear:
http://www.steingraeber-modelle.de/Zahnr...01217_4208
And this bushing:
http://www.steingraeber-modelle.de/Einst...01303_4210

To make a double gear with 17/68 teeth, module 0.5 for the inner, 0.4 for the outer gear, 6.5mm total thickness, 3mm bore. If you have a source for the gears alone, you might ask them for the bushings only.

At the bottom of the site there is a link to the english version - i dont know where they ship though (and where you are located).