Post Reply 
Upgrade Didn't Work
05-26-2016, 10:50 PM
Post: #2
RE: Upgrade Didn't Work
Update on "Upgrade Didn't Work"
1) I validated the USB cable was good for both data transmission and power by connecting the HP power adapter and usb cable to a Samsung Galaxy S2 and verified battery charging and data transmission on the same USB port I was using before. I was able to charge the old battery and look at files on my Samsung S2. At this point the Prime was still dead.
2) I then deleted the new 2016 CK from my PC and re-installed the CK from 2015.
3) I started the CK from 2015 and then connected to the Prime via the same USB port.
4) When the CK said connecting to.... I pressed the reset in the rear of the Prime and this brought the Prime back to life.
5) I then deleted the 2015 CK and installed the new 2016 CK and updated the Prime again to the current version 10077.

regards,
minus1
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Upgrade Didn't Work - minus1 - 05-25-2016, 10:18 PM
RE: Upgrade Didn't Work - minus1 - 05-26-2016 10:50 PM
RE: Upgrade Didn't Work - informach - 05-27-2016, 02:01 AM



User(s) browsing this thread: 1 Guest(s)