Some assorted HP67/97 questions

[Dieter]

(06-04-2016 07:25 PM)Guenter Schink Wrote:  1. DSP 2: 1/3=0.33 /10=0.03 /10=3.333333333-03

So the manual is right and the simulator is ...different. #-)

(06-04-2016 07:25 PM)Guenter Schink Wrote:  2. RTN: the Calc will stop at the following line. R/S will simply continue from there.

So it's the same as on an HP41. I wonder why some calculators do it this way while others return to the program top at step 000.

(06-04-2016 07:25 PM)Guenter Schink Wrote:  3. this short program with [x⁸] runs about 15 sec
(...) Using [x²] runs in about 7 to 8 seconds

I expected as much. The 41 also is roughly twice as fast with x² instead of y^x.

BTW, I assume the STO(i) and DSZ(i) are supposed to be STO I (35 33) and DSZ I (31 33) ?-)

Thank you very much, Günter.

Dieter