Another stupid 41C question

[JurgenRo]

Monte,
the direct link seems not to function. So, I've copied the respective text excerpt for your convenience:

Quote:RAW Format: Page 4
==========

[compiled code] + [1-byte checksum] + [trailer]
[1-byte checksum] - sum of all [compiled code] bytes
[trailer] - filler bytes, so that filesize = multiple 256-byte blocks

Usage: optional parameters are surrounded by <>

RAW file(s) to LIF file ( LIF name = <name> or [infile] )
/r=infile<.raw> /l<=outfile.lif> <name>

If output file is specified, [infile] can be a directory of RAW files.
For example: hp41uc /r=\rawdir\*.raw /l=hpil.lif

RAW file to P41 file ( P41 name = <name> or [infile] )
/r=infile<.raw> /p<=outfile.p41> <name>

RAW file to BIN file
/r=infile<.raw> /b<=outfile.bin>

RAW file to DAT file ( hex digits in ASCII form )
/r=infile<.raw> /d<=outfile.dat>

RAW file to TXT file ( de-compile )
/r=infile<.raw> /t<=outfile.txt> </a> </n> </x>

De-compiler Options:
/a - append text using: [ "Ãtext" ], instead of: [ >"text" ]
/n - generate line numbers
/x - use [ XROM mm,ff ] for all XROM Functions
/x23 - use [ XROM 23,ff ]: [ XROM 23,1 ], instead of [ COPYFL ]
/x25 - use [ XROM 25,ff ]: [ XROM 25,46 ], instead of [ X<>F ]
/x26 - use [ XROM 26,ff ]: [ XROM 26,10 ], instead of [ CLOCK ]
/x28 - use [ XROM 28,ff ]: [ XROM 28,27 ], instead of [ AUTOIO ]


Hope, this is of any use for you.
Juergen