The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 795 - File: showthread.php PHP 7.4.33 (FreeBSD)
File Line Function
/showthread.php 795 errorHandler->error




HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP97 printer gear replacement

Post Reply 
HP97 printer gear replacement
11-14-2016, 09:06 PM
Post: #1
Hans-Peter Offline
Member
 		Posts: 101
Joined: Dec 2013
HP97 printer gear replacement
After a long search, I found a supplier for the replacement of the rubber gear in Germany.
The bore I had to increase from 2mm to 2.38mm and with some sandpaper I had to reduce the thickness by 0.1mm. But now the brass gear runs perfectly.

I have the running surfaces with little oil. Nevertheless, the printer makes noise as a saw.

Now the supply for the European HP97 printers is ensured :-)

http://www.modellbauershop.de/zahnraeder...3-30-z.php
Produkt-ID: 390760
Price €11,25

Hans-Peter


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP97 printer gear replacement - Hans-Peter - 11-14-2016 09:06 PM
RE: HP97 printer gear replacement - Jlouis - 11-15-2016, 02:33 PM
RE: HP97 printer gear replacement - Jlouis - 11-15-2016, 02:37 PM
RE: HP97 printer gear replacement - Tom V - 08-21-2018, 05:25 PM
RE: HP97 printer gear replacement - Jlouis - 08-22-2018, 12:59 AM
RE: HP97 printer gear replacement - Tom V - 08-25-2018, 04:51 PM
RE: HP97 printer gear replacement - pipesm - 12-09-2021, 06:31 PM
RE: HP97 printer gear replacement - teenix - 12-15-2021, 11:08 PM
RE: HP97 printer gear replacement - teenix - 12-15-2021, 09:07 PM



User(s) browsing this thread: 2 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication