HP Forums / HP Calculators (and very old HP Computers) / HP Prime v / Leaving original user input in verbatim on CL after execution... any ideas?

Post Reply 
Leaving original user input in verbatim on CL after execution... any ideas?
01-30-2017, 06:59 AM (This post was last modified: 01-30-2017 06:59 AM by Tim Wessman.)
Post: #2
Tim Wessman Offline
Senior Member
 		Posts: 2,293
Joined: Dec 2013
RE: Misbehaving ENG num format... any ideas?
I am definitely not seeing this on my end when I try to reproduce. Is you calcualtor up to date? If so, please describe the exact way you are getting this.

I set to engineering 3, put in 1e-20 or similar examples, and then tapped them to copy back. They all came back in eng notation.
TW

Although I work for HP, the views and opinions I post here are my own.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Misbehaving ENG num format... any ideas? - Tim Wessman - 01-30-2017 06:59 AM



User(s) browsing this thread: 2 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication