HP Forums / HP Calculators (and very old HP Computers) / General Forum v / [HP 71B] Software for FRAM71 users

Post Reply 
[HP 71B] Software for FRAM71 users
02-02-2017, 12:49 AM (This post was last modified: 02-02-2017 12:57 AM by Dave Frederickson.)
Post: #5
Dave Frederickson Offline
Senior Member
 		Posts: 2,255
Joined: Dec 2013
RE: [HP 71B] Software for FRAM71 users
Hi André,

F0000-FFBFF is available for use, which in FRAM71B terms is one 16k device. See Cases 1 & 2 in the link. FFC00-FFFFF is the Configuration "Garbage Dump", see S/W IDS, Vol. 1, Sect. 2.1 & 2.8 and is RESERVED so you need to subtract 1k from the available memory space. Also, if an HC ROM is configured then everything above E0000 is used or unavailable.

Regards Dave
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[HP 71B] Software for FRAM71 users - dayd - 02-01-2017, 10:17 PM
RE: [HP 71B] Software for FRAM71 users - Dave Frederickson - 02-02-2017 12:49 AM



User(s) browsing this thread: 8 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication