[HP 71B] Software for FRAM71 users

[dayd]

(02-07-2017 12:06 AM)Dave Frederickson Wrote:  In Phase Three I believe you meant that RAM and ROM/IRAM can't be configured in the same 32k block.

Indeed Dave, that's what I meant, I will correct the typo.

(02-07-2017 12:06 AM)Dave Frederickson Wrote:  In the S/W IDS, Vol. 2, p.4-8 under the CONF60 routine a "Page" is defined as 10000H nibbles. Pages occupied or partially occupied by system RAM are marked as unavailable for configuring ROM.

Good catch! For my part I thought I didn't have Vol.2&3 but I finally found all volumes (3+3 ? ) and what a good surprise to see more details on same topic. There is other useful related information. I'm particularly curious about the process the OS uses to properly remove ROMs or IRAMs with Lex files because I have sometimes big memory losses when removing with just POKE”2C0xx”,”00” OFF/ON even with the last connected Fram Block and that's not just a Memory Lost but IRAMs Fram blocks that turn into RAM... The computer freezes with the poke in the screen. Last time was with the workbook71, the SC Forth-Assembler is particularly sensitive too.
Any ideas about that ?