Post Reply 
HP 9825a
04-07-2017, 03:52 AM
Post: #37
RE: HP 9825a
Replacing the transistor has fixed the permanent "End of Tape" error on my 9815a!

The motor moves the tape briefly for a rewind command but then I get the "Cartridge Out" error.

Removing and reinserting the tape will clear the error until the motor begins moving.

By applying downward pressure on the tape I was able to have it respond to a "Mark" command.

I suspect that my replacement capstan material is too thick and/or the tape is not fully latching.

The capstan material I'm using is 8.9 mm od, 6.3 mm id so the thickness is 1.3 mm.

Any suggestions?

Try CC41!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP 9825a - Geoff Quickfall - 03-10-2017, 01:39 AM
RE: HP 9825a - Geoff Quickfall - 03-15-2017, 05:49 PM
RE: HP 9825a - Thomas Okken - 03-20-2017, 01:57 AM
RE: HP 9825a - Dave Frederickson - 03-20-2017, 02:43 AM
RE: HP 9825a - Alejandro Paz(Germany) - 03-17-2017, 12:13 PM
RE: HP 9825a - Paul Dale - 03-20-2017, 09:58 AM
RE: HP 9825a - Geoff Quickfall - 03-20-2017, 06:15 PM
RE: HP 9825a - Dave Frederickson - 03-20-2017, 07:01 PM
RE: HP 9825a - sleibson - 03-21-2017, 02:23 PM
RE: HP 9825a - Geoff Quickfall - 03-21-2017, 04:57 PM
RE: HP 9825a - Geoff Quickfall - 03-22-2017, 01:19 AM
RE: HP 9825a - cruff - 03-22-2017, 11:54 PM
RE: HP 9825a - Paul Berger (Canada) - 03-23-2017, 12:22 AM
RE: HP 9825a - Geoff Quickfall - 03-22-2017, 02:30 AM
RE: HP 9825a - anetzer - 03-22-2017, 10:20 AM
RE: HP 9825a - Geoff Quickfall - 03-23-2017, 01:20 AM
RE: HP 9825a - Paul Berger (Canada) - 03-23-2017, 02:35 AM
RE: HP 9825a - Geoff Quickfall - 03-23-2017, 03:49 AM
RE: HP 9825a Printer Story - sleibson - 03-23-2017, 04:27 AM
RE: HP 9825a - Paul Dale - 03-23-2017, 06:27 AM
RE: HP 9825a - Geoff Quickfall - 03-23-2017, 05:34 AM
RE: HP 9825a - Craig Bladow - 03-30-2017, 12:25 AM
RE: HP 9825a - Geoff Quickfall - 03-30-2017, 01:48 AM
RE: HP 9825a - Craig Bladow - 04-01-2017, 06:36 PM
RE: HP 9825a - cruff - 04-01-2017, 09:09 PM
RE: HP 9825a - Craig Bladow - 04-01-2017, 09:26 PM
RE: HP 9825a - Craig Bladow - 04-01-2017, 09:33 PM
RE: HP 9825a - Geoff Quickfall - 04-02-2017, 12:35 AM
RE: HP 9825a - Craig Bladow - 04-02-2017, 12:36 AM
RE: HP 9825a - Craig Bladow - 04-02-2017, 12:41 AM
RE: HP 9825a - Geoff Quickfall - 04-02-2017, 01:04 AM
RE: HP 9825a - Craig Bladow - 04-03-2017, 01:53 AM
RE: HP 9825a - Geoff Quickfall - 04-03-2017, 03:50 AM
RE: HP 9825a - Craig Bladow - 04-05-2017, 04:03 AM
RE: HP 9825a - Geoff Quickfall - 04-05-2017, 07:34 AM
RE: HP 9825a - cruff - 04-06-2017, 12:22 AM
RE: HP 9825a - Craig Bladow - 04-07-2017 03:52 AM
RE: HP 9825a - cruff - 04-07-2017, 12:05 PM
RE: HP 9825a - Craig Bladow - 04-09-2017, 12:07 AM
RE: HP 9825a - Craig Bladow - 04-29-2017, 09:48 PM
RE: HP 9825a - Geoff Quickfall - 04-29-2017, 11:06 PM
RE: HP 9825a - cruff - 04-30-2017, 12:05 AM
RE: HP 9825a - Geoff Quickfall - 04-30-2017, 03:11 AM
RE: HP 9825a - Craig Bladow - 05-06-2017, 02:35 PM
RE: HP 9825a - Craig Bladow - 05-22-2017, 11:30 PM
RE: HP 9825a - Craig Bladow - 08-26-2017, 06:22 PM
RE: HP 9825a - vassilisprevelakis - 09-07-2017, 01:51 PM



User(s) browsing this thread: 1 Guest(s)