Post Reply 
Recreating Woodstock (67)
07-26-2017, 10:00 AM (This post was last modified: 07-26-2017 10:05 AM by Alejandro Paz(Germany).)
Post: #5
RE: Recreating Woodstock (67)
The metal domes, what I forgot to mention, I got them via aliexpress. There are a lot of different sizes, and kinds.

The ones I used are 9 mm in diameter. I'd say they are like the ones HP used, more or less.
9 mm metal dome, the ones I bought
I got bigger ones (because in aliexpress is sometimes difficult to size exactly what they are offering...) that have a pin, so you need a pad and two holes for the pins...
12 mm with pins

I also got 7 mm ones, they are a bit small, I think.
As you see the domes are held in place with tape, one side tape...

Something like this would probably also do:

8 mm cross metal dome
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Recreating Woodstock (67) - EdS2 - 06-01-2017, 08:00 AM
RE: Recreating Woodstock (67) - Harald - 07-26-2017, 08:50 AM
RE: Recreating Woodstock (67) - PANAMATIK - 07-26-2017, 02:25 PM
RE: Recreating Woodstock (67) - Alejandro Paz(Germany) - 07-26-2017 10:00 AM



User(s) browsing this thread: 2 Guest(s)