Post Reply 
Voyager crash
09-24-2017, 04:53 AM
Post: #9
RE: Voyager crash
(09-23-2017 08:09 PM)Joe Horn Wrote:  Just got my first HP-12C and already found a way to crash it which apparently works on all the original Voyagers (not the newer ones apparently). Just key the following:

Type 10 (you don't have to press ENTER). <== Pressed "1" and "0"
Press and hold down ON. <== OK, did that. Display is blank.
Press the top left key exactly twice while still holding ON down. <== Pressed the "n" key twice
Release ON (see 0E10 in the display). <== Display is still blank.
Press 1/X --> crash <== Display is still blank.

My HP 12c Platinum 25th Anniversary Edition, courtesy of HHC 2006, responds as shown above - the first "Press and hold down ON" appears to turn it off and the subsequent steps do nothing to a sleeping calculator. Interesting...

Joe, weren't you at HHC2006? You should have one of these as well and can confirm if mine is goofy or not.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Voyager crash - Joe Horn - 09-23-2017, 08:09 PM
RE: Voyager crash - Gilles59 - 09-23-2017, 08:37 PM
RE: Voyager crash - BarryT - 09-23-2017, 08:57 PM
RE: Voyager crash - Jlouis - 09-23-2017, 08:57 PM
RE: Voyager crash - Gerson W. Barbosa - 09-23-2017, 10:11 PM
RE: Voyager crash - DavidM - 09-23-2017, 10:18 PM
RE: Voyager crash - Steve Simpkin - 09-23-2017, 10:54 PM
RE: Voyager crash - J-F Garnier - 09-24-2017, 07:58 AM
RE: Voyager crash - Joe Horn - 09-24-2017, 12:04 PM
RE: Voyager crash - Csaba Tizedes - 09-23-2017, 10:30 PM
RE: Voyager crash - Jim Horn - 09-24-2017 04:53 AM
RE: Voyager crash - Joe Horn - 09-24-2017, 07:09 AM



User(s) browsing this thread: 5 Guest(s)