Difference between Real and Virtual Calculator

[simone_71]

Hi to all. I'm current using a real Calculator with 12066 (2017 07 10) software version and Virtual calculator on my laptop with 11226 (2016 12 08) software version. As I know those version are the mos updated. Yesterday i wrote this simple code:

Code:


//The formula to compute PT100/1000 is:
//
//R(t)=R(0)(1+At+Bt^2+c(t-100)t^2)
//
//​​where t is the temperature, R(0) is
//the 0degree-resistance (100 or 1000)
//The remaining parameters A, B and C
//depend on the temperature standard in
//use and might be measured by the sensor
//manufacturer for additional accuracy.
//For the ITU-90 standard they equal:
//
//A = 3.9083E10^-3
//B = -5.7750E10^-7
//C = -4.1830E10=12 for t<0
//    0.0 for t>=0
//
//Simone Selleri 2017


EXPORT RTD(r,t,d)
BEGIN

3.9083ᴇ-3▶A;
5.7750ᴇ-7▶B;
-4.1830ᴇ-12▶C;
r▶R;
t▶T;
d▶D;

"R=D*(1+A*T+B*T^2+C*(T-100)*T^3)"▶E1;
CASE
IF R==0 AND T<0 THEN SOLVE(E1,R);END;  
IF R==0 AND T>=0 THEN 0.0▶C;SOLVE(E1,R);END;
IF T==0 AND R<>0 THEN SOLVE(E1,T);END;
END;
END;

This code is working fine on my real calculator, but is not possible to run on virtual one due a syntax error





Can someone explain me why it happens?
I always use the virtual calculator as "beta tester" for my programs, because is easier and quicker to write, save and test, but now i'm getting different behavior, I'm confused.