HP Prime Pro (1)

[toml_12953]

(10-10-2017 12:51 PM)moonbeam Wrote:  

(10-10-2017 11:06 AM)toml_12953 Wrote:  I'm using Windows 10 and have the same problem. The calc app doesn't see the network. I have IP networking enabled in the CK and have tried opening ALL ports in my cable modem/router (just for this test!) I still get no connection.

Opening all ports on your cable modem/router is a dangerous course of action. Depending on the specifics, you may have invited the whole Internet inside your network.

You don't go into detail, but I would first verify that the devices running the CK and calc app are in fact in the same IP network. If they are, is your wifi access point configured to isolate wifi clients from each other and/or the wifi interface from the wired one? Finally, if Android is involved, a no-root firewall will break communication between the CK and the app.

I know opening all ports is dangerous. That's why I turned off the WAN before doing it and closed the ports before turning on the WAN again.

I only have one IP network with one subnet.