ILPer as MASSMEM for HP71b

[Dave Frederickson]

(10-16-2017 11:09 PM)rprosperi Wrote:  Also, have you formatted the virtual drives prior to use? On the 71B, you would do:

INITIALIZE [VOL-LABEL]:TAPE(1), where VOL-LABEL is an optional volume label for that particular virtual disk.

Before you can initialize a virtual drive you must mount a LIF disc image. One way is to create a zero byte file, rename the extension to .LIF or .DAT, and then mount the image using the Open file diaglog in the Mass Storage area of the ILPer window. A LIF disc image can also be created and initialized using HPDir.

Dave