Search
Member List
Calendar
Help
|
HP 41 not working
|
|
12-16-2017, 08:05 PM
(This post was last modified: 12-16-2017 08:07 PM by AndiGer.)
Post: #3
|
|||
|
|||
|
RE: HP 41 not working
Today fiddled around with a 5V DC power source in the calc.
When I put power only little life appeared in the display for a very short time. When power switched off the display shows some signs of life. Switching on and off more often and fast changes from upper half of starburst in the right half of the display to full width of the display's upper half starburst. Waiting with no power for about 5 seconds I can repeat from the start with only little signs of life. Any ideas? Thanks Andi |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
HP 41 not working - AndiGer - 12-10-2017, 09:27 PM
RE: HP 41 not working - Frido Bohn - 12-11-2017, 10:35 AM
RE: HP 41 not working - AndiGer - 12-16-2017 08:05 PM
RE: HP 41 not working - cruff - 12-16-2017, 09:18 PM
RE: HP 41 not working - jebem - 12-17-2017, 03:21 PM
RE: HP 41 not working - AndiGer - 12-17-2017, 05:16 PM
RE: HP 41 not working - jebem - 12-18-2017, 07:38 AM
RE: HP 41 not working - Frido Bohn - 12-18-2017, 11:40 AM
RE: HP 41 not working - jebem - 12-18-2017, 01:10 PM
Light at the end of the tunnel, or the drawer - d b - 12-18-2017, 04:59 PM
RE: HP 41 not working - AndiGer - 12-18-2017, 05:08 PM
RE: HP 41 not working - d b - 12-20-2017, 05:13 AM
RE: HP 41 not working - mfleming - 12-19-2017, 03:17 AM
RE: HP 41 not working - AndiGer - 12-20-2017, 07:38 PM
|
User(s) browsing this thread: 1 Guest(s)