Exactly how do you update the DM42 Firmware?

[rprosperi]

@zeno333 - With all due respect, relax a bit and please be a bit more patient...

It's only been 2.5 hours since your first post; since then you've posted 10 more times, asking for help about 30 times. As you can see, folks here want to help, but a perfect reply with detailed steps that you can follow may take hours or even days to be posted.

Moreover the update from 3.0 to 3.1 is not too dramatic, and it seems there will be a 3.2 update before long, so you may want to wait for that to avoid doing the update twice.

The original instructions (which clearly do need to updated) were created for the users in the Beta program, and the production units are improved and easier and more reliable to update.

Until then, my suggestions are:

1. Join and add a post on the SM Forum, noting that the available instructions are out of date, and could they please be updated.

2. Find online help about how to install unsigned drivers in Windows 10. This is a windows issue, not a SM issue, and there are lots of sites with these simple instructions. There seem to be a lot of steps, but the process is actually fairly simple.

Please don't give up, use the opportunity to learn something new and expand your skills.

Good luck, and please do report success when you've reached it.