HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP-41 module housings

Post Reply 
HP-41 module housings
01-13-2018, 08:12 PM
Post: #7
Nate Martin Offline
Member
 		Posts: 87
Joined: Dec 2013
RE: HP-41 module housings
(01-13-2018 07:48 PM)hth Wrote:  Very cool!

Is there any solution for the connector of the module house too somewhere?

Håkan

I was originally thinking of using pogo pins soldered to a perf board or custom board, but I also lucked into some of the connectors. A couple of readers on this forum have already been playing around with the modules and may have a solution to the connectors.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP-41 module housings - Nate Martin - 01-13-2018, 05:45 PM
RE: HP-41 module housings - Nate Martin - 01-13-2018, 06:43 PM
RE: HP-41 module housings - rprosperi - 01-13-2018, 07:43 PM
RE: HP-41 module housings - hth - 01-13-2018, 07:48 PM
RE: HP-41 module housings - Nate Martin - 01-13-2018 08:12 PM
RE: HP-41 module housings - Sylvain Cote - 01-13-2018, 07:54 PM
RE: HP-41 module housings - Garth Wilson - 01-13-2018, 07:54 PM
RE: HP-41 module housings - HP-Collection - 01-14-2018, 02:51 PM
RE: HP-41 module housings - rprosperi - 01-14-2018, 02:55 PM
RE: HP-41 module housings - Sylvain Cote - 01-14-2018, 07:07 PM
RE: HP-41 module housings - PeterP - 01-18-2018, 12:36 AM
RE: HP-41 module housings - Jurgen Keller - 01-14-2018, 06:25 PM
RE: HP-41 module housings - Sylvain Cote - 01-18-2018, 12:57 AM
RE: HP-41 module housings - PeterP - 01-18-2018, 08:54 AM
RE: HP-41 module housings - rprosperi - 01-20-2018, 02:19 PM
RE: HP-41 module housings - Mark Hardman - 01-20-2018, 05:12 PM



User(s) browsing this thread: 8 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication