HP 41CV key problem

[BarryT]

Hi Trond,
. Dunno if this will work for you or not, but, you might try making sure the screws residing under the bottom two rubber feet are nice and tight. If they aren't, that can sometimes cause issues.

. On mine, the power button acted a little flakey, not registering all the time. Turns out that while the screw under the foot nearest the power button seemed to be quite snug, it actually needed to be tightened down more. I popped the foot pad off and cranked down on the screw to make sure it was good and tight, ( but not overly so, you don't want to strip the head or crack the case ). Ever since then it's worked perfectly.

. That's what worked for my scenario, so you might give that a try. Hopefully some others will chime in with some other possible scenarios and fixes.