Threaded Mode | Linear Mode

grsbanks · 02-16-2018, 04:12 PM

This post was linked to in a Facebook group that I recently joined.

OK, it's from 2 years ago but I thought I'd just comment on a couple of things:

(01-04-2016 01:02 PM)Geoff Quickfall Wrote: Not so plus:

1 CAT 4,5 and 6 scroll way too fast, will be fixed in updated firmware.
2 PSE way too fast in 48mHz setting, will be fixed in updated firmware.
3 124 registers on extended instead of full 600, may be fixed in future firmware.

1 was fixed in firmware V25.

2 was fixed in firmware V24.

3 was half fixed in V25. There just isn't enough RAM on the LPC1115 chip used in the DM41(L) to provide the full 600 registers of X-Mem. However, by reorganising various parts of the firmware it has been possible to add one X-Mem module's worth of extended memory so V25 gives you 362 registers of it instead of the original 124 that are provided with the X-Func module.