HP Forums / HP Calculators (and very old HP Computers) / HP Prime v / formula with radicals

Post Reply 
formula with radicals
03-23-2018, 01:52 AM
Post: #4
Joe Horn Offline
Senior Member
 		Posts: 2,018
Joined: Dec 2013
RE: formula with radicals
Go into CAS Settings, and change Simplify to Maximum, and put a checkmark in the "Use i" box. Then one keystroke (Enter) will give you the result shown on the chalkboard. If two keystrokes is ok, leave the Simplify setting at its default (Minimum) and tap the "simplify" softkey after you get the initial result.
<0|ΙΈ|0>
-Joe-
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
formula with radicals - Darno - 03-22-2018, 07:35 PM
RE: formula with radicals - Darno - 03-22-2018, 09:12 PM
RE: formula with radicals - Joe Horn - 03-23-2018 01:52 AM
RE: formula with radicals - Darno - 03-23-2018, 02:06 AM
RE: formula with radicals - Joe Horn - 03-23-2018, 02:17 AM
RE: formula with radicals - Darno - 03-23-2018, 02:54 AM
RE: formula with radicals - DrD - 03-23-2018, 09:18 AM
RE: formula with radicals - Darno - 03-23-2018, 01:25 PM
RE: formula with radicals - toshk - 03-23-2018, 01:44 PM
RE: formula with radicals - Darno - 03-23-2018, 02:33 PM
RE: formula with radicals - toshk - 03-23-2018, 03:03 PM
RE: formula with radicals - Darno - 03-23-2018, 03:20 PM
RE: formula with radicals - parisse - 03-26-2018, 11:09 AM
RE: formula with radicals - DrD - 03-26-2018, 02:02 PM
RE: formula with radicals - parisse - 03-26-2018, 02:14 PM
RE: formula with radicals - DrD - 03-26-2018, 03:36 PM
RE: formula with radicals - Eddie W. Shore - 03-27-2018, 03:29 AM
RE: formula with radicals - Darno - 03-28-2018, 06:54 PM
RE: formula with radicals - Darno - 03-29-2018, 02:10 PM



User(s) browsing this thread: 2 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication