Threaded Mode | Linear Mode

Zaphod · (This post was last modified: 04-25-2018 07:24 PM by Zaphod.)

You will have to remove the back cover , remove the four feet carefully (as you will be reusing), four screws underneath

But then you face the same problem as someone in another thread today , you will need to remove plastic melt stakes (but leave enough post so you can remelt) so you can remove the PCB and gain access to the display.
I’m guessing it uses a self adhesive pad around the display and the front frame , but you’ll soon know how to sort it out once you get that PCB out.

Take a look at this for disassembly techniques : https://m.youtube.com/watch?v=qERwsdjoX7c

I wouldn’t attempt it unless you feel confident as you can quickly mess up those posts so you will never get a strong fixing via the post-repair post melting technique.