MANPIP

[Jerussi]

I have attached the partial listing (80%) of the program "MANPIPE" retrieved from old magnetic cards.

I tested the program and here is what I found:

1. The USER key must be set manually
2. QF works
3. DI runs but gives strange results. With Q= 10 CFS @ S=.01 ft/ft, (N=.013) the result is “DI= 13E-2 IN”
4. Y doesn’t work. Does not run
5. S works
6. QP works

Cards that loaded fine: 1 of 5, 3 of 5, 4 of 5, and 5 of 5
Card that had error was 2 of 5

From looking at the printout I see LBL’s for A, C, D, and E but not one for B. That must have been on card 2 of 5.

Lines 212, 223, 228, 233, and 228 should show the flying goose symbol before the text. I believe it is “ALPHA shift K”