DM41L overlay files

[kintekobo]

I wanted to use an overlay with my DM41L but SM haven't managed to source any so far so I decided to make my own. I designed it in Fusion360 and exported the GCode to my CNC mill and was pleasantly surprised by the result.

In case anyone else has access to either a laser cutter or a CNC mill I have made the design files available on Thingiverse at the following location -
https://www.thingiverse.com/thing:2981286

as well as the Fusion360 online link at -
https://a360.co/2Ku8Dit

I have attached some pictures of the prototype overlays that were cut from photographic paper as a test while I await the arrival of some thin white plastic to produce the actual overlays.

I hope this is of some use to somebody.

Chris