Problem using unit "mn"
|
09-06-2018, 01:27 PM
Post: #8
|
|||
|
|||
RE: Problem using unit "mn"
(09-06-2018 03:32 AM)Tim Wessman Wrote: CAS does not support the concept of fixed width integers. The author has no interest in adding them as it does not fit with CAS type operations. Well, small price to pay considering how extensive it is compared to the old HP 49/50 series CAS (or the original HP 40 CAS). This is the first time ever I'm not going to teach myself all the commands 100%. I found the HP Prime CAS Command set PDF available in English: https://www-fourier.ujf-grenoble.fr/~par...me_cas.pdf It seems that the integrated version 1.49 does not contain absolutely every command. The document is most likely not properly adapted for the HP Prime. I didn't list every capitalized name/NAME version difference - only: rref 138 & xor, 197 The page numbers are off thus I couldn't check the functions quickly. !=, 196, 507; %e, 196; %i, 196; %pi, 196; &&, 197; &*, 324; &ˆ, 324; /laplace, 95; ||, 197; ‘’, 61 angleat, 423; angleatraw, 423; areaat, 424; areaatraw, 424 bounded_function, 67 Celsius2Fahrenheit, 374; colSwap, 317; comment, 491; common_perpendicular, 377 distanceat, 425; distanceatraw, 426 euler_gamma, 196 fadeev, 328; Fahrenheit2Celsius, 374; false, FALSE, 196; frac, 204 InputStr, 491; integrate, 76; is_coplanar, 443 mRowAdd, 323 norm, 290 ofnom, 57 pcoef, 157, 163; perimeterat, 427; perimeteratraw, 428; plotdensity, 190; POLYFORM, 306 ramn, 332; rand, 229; randmatrix, 332; rootof, 155; rref, 138, 329 slopeat, 428; slopeatraw, 429; snedecor, 239; snedecor_cdf, 242; snedecor_icdf, 246; sq, 199; srand, 236; sturm, 171 table, 271; time, 41; true, TRUE, 196 UTPC, 236; UTPF, 236; UTPN, 237; UTPT, 237 xor, 197 ΔLIST, 285; ΠLIST, 286; ΣLIST, 286 _______________________________________ Note that the catalog on the calculator (PC Emulator) might be outdated. Also there are MORE commands that are listed in the document index. Finally, there's a general (PC?) version PDF-document here: https://www-fourier.ujf-grenoble.fr/~par...cmd_en.pdf |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Problem using unit "mn" - ChrisSchw - 09-05-2018, 10:46 AM
RE: Problem using unit "mn" - DA74254 - 09-05-2018, 01:43 PM
RE: Problem using unit "mn" - StephenG1CMZ - 09-06-2018, 01:52 PM
RE: Problem using unit "mn" - ChrisSchw - 09-05-2018, 02:10 PM
RE: Problem using unit "mn" - parisse - 09-05-2018, 06:39 PM
RE: Problem using unit "mn" - CyberAngel - 09-06-2018, 01:31 AM
RE: Problem using unit "mn" - CyberAngel - 09-06-2018, 03:04 AM
RE: Problem using unit "mn" - Tim Wessman - 09-06-2018, 03:32 AM
RE: Problem using unit "mn" - CyberAngel - 09-06-2018 01:27 PM
RE: Problem using unit "mn" - parisse - 09-06-2018, 03:33 PM
RE: Problem using unit "mn" - CyberAngel - 09-06-2018, 04:08 PM
RE: Problem using unit "mn" - parisse - 09-06-2018, 06:54 PM
RE: Problem using unit "mn" - CyberAngel - 09-06-2018, 07:16 PM
|
User(s) browsing this thread: 1 Guest(s)