12C vs 11C program, 11C not working
|
12-17-2018, 05:11 AM
Post: #4
|
|||
|
|||
RE: 12C vs 11C program, 11C not working
The sequence produced by your HP-11C is:
3.781 = 3.78 3.782 = 14.29 3.783 = 54.01 3.784 = 204.16 3.785 = 771.72 3.786 = 2917.10 I can simulate that behaviour by using SST before R/S: 1 f A -3.78 2 SST 20 R/S -14.29 3 SST 30 R/S -54.01 4 SST 40 R/S -204.16 -1 SST -10 R/S -771.72 -2 SST -20 R/S -2917.10 What happens is that the 0 in line 12 is appended to the input. However I experience the same behaviour with the HP-12C. Could you check what happens if you use ENTER to complete your entry? 1 f A -3.78 2 ENTER R/S ? 3 ENTER R/S ? 4 ENTER R/S ? -1 ENTER R/S ? -2 ENTER R/S ? For my tests I used version 1.0.1 of nonpareil for OS X Copyright 2005-2012 Maciej Bartosiak based on Nonpareil 0.77 for Linux Copyright 2004-2006 Eric Smith Thus the real hardware could behave differently. Cheers Thomas |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)