Post Reply 
HP 67 programming?
11-01-2019, 01:53 AM
Post: #8
RE: HP 67 programming?
(11-01-2019 01:45 AM)Thomas Okken Wrote:  They have become more expensive in recent years, but even at $300-400, you're paying a fraction of the original price. They were $450 in 1976, that's equivalent to $2000 today. Smile

N.B. If you do go shopping around for one, make sure to budget an additional $100 or so to get the card reader fixed, those almost invariably need to be repaired because the rubber on the pinch roller turns to goo over time. Sometimes you'll see one offered that has already had that repair done, but most haven't.

How are the keys compared to HP41C? Are the buttons often messed up with age? That's one thing that has bugged me with two HP 41C that have had the last few years, they both had some buttons that were either sticky or I had to push a few of them harder than the others to get a reaction.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP 67 programming? - Trond - 10-30-2019, 12:43 AM
RE: HP 67 programming? - toml_12953 - 10-30-2019, 01:04 AM
RE: HP 67 programming? - Thomas Okken - 10-30-2019, 01:20 AM
RE: HP 67 programming? - Namir - 10-30-2019, 01:51 AM
RE: HP 67 programming? - Trond - 10-30-2019, 03:30 AM
RE: HP 67 programming? - Trond - 11-01-2019, 12:26 AM
RE: HP 67 programming? - Thomas Okken - 11-01-2019, 01:45 AM
RE: HP 67 programming? - Trond - 11-01-2019 01:53 AM
RE: HP 67 programming? - Thomas Okken - 11-01-2019, 03:06 AM
RE: HP 67 programming? - Helix - 11-03-2019, 11:23 PM
RE: HP 67 programming? - DaveBr - 11-04-2019, 02:24 PM



User(s) browsing this thread: 1 Guest(s)