Help needed with HP-IL disk drive

[Dave Frederickson]

(05-26-2014 02:50 AM)Paul Berger (Canada) Wrote:  What I did for mine is I made up pigtails with female spade connectors on one end that I slip over the battery contact, don't worry if they are not the same width as long as they stay on the terminals, and on the other end I have a connector that I plug the power supply into. You could also put the spade connectors right on the ends of the leads from the power supply too, just be careful of the polarity.

The connector on the battery that plugs into the 9114 is a Cinch-Jones S-302-CCT available from Newark. The attached periodicals contain articles on building your own power supply for the 9114.

Link 1 and Link 2.

Dave