Post Reply 
HP-41C LCD display and driver
01-21-2020, 03:38 PM
Post: #3
RE: HP-41C LCD display and driver
(01-20-2020 03:37 PM)Paul Berger (Canada) Wrote:  The metal clips shown in the photo hold the sandwich of the board and the glass, with a permissive and compressible connection material between them, together. The display shown appears to have the wire coils type of interconnect, however any that I have taken apart has the elastomer type interconnects. I have taken them apart and cleaned the connection points, and successfully put them back together. It is important to use lint free cloths to clean as any tiny bit of lint you leave behind may result in a failed connection.

Paul.

Thanks Paul. Mine are the elastomeric type. I've cleaned them but no improvement, so I assume that the display itself is damaged.

HP-41C, HP-41CV, HP 48G, HP 49G, HP 50g, HP 35s, HP 15C CE, HP Jornada 420, DM41X β, Zengrange Gunzen
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: HP-41C LCD display and driver - Markeporter - 01-21-2020 03:38 PM



User(s) browsing this thread: 1 Guest(s)