HP Forums / Not HP Calculators / Not quite HP Calculators - but related v / 41CL MMU disabled when unplugging serial cable

Post Reply 
41CL MMU disabled when unplugging serial cable
03-04-2020, 09:15 AM (This post was last modified: 03-04-2020 09:18 AM by Ángel Martin.)
Post: #8
Ángel Martin Offline
Senior Member
 		Posts: 1,418
Joined: Dec 2013
RE: 41CL MMU disabled when unplugging serial cable
I too suffer from the same (small) issue in two of my three CL machines - but the third one seems to be more rugged. Sometimes I first touch the base ring of the connector on the CL port with the tip of the jack before plugging it in, and then the MMU is not disabled. Note however that this is probably a bad practice electrically speaking, so I wouldn't suggest you do it!

My setup is a direct RS-232 port (yes, still a desktop PC with Windows-7)
"To live or die by your own sword one must first learn to wield it aptly."
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: 41CL MMU disabled when unplugging serial cable - Ángel Martin - 03-04-2020 09:15 AM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication