Post Reply 
Restore to hardware calculator broken?
05-04-2020, 08:36 PM
Post: #11
RE: Restore to hardware calculator broken?
(05-04-2020 02:16 PM)Orome Wrote:  
(03-24-2020 09:51 PM)rprosperi Wrote:  Reboot the Prime and hold the three keys with the orange C F O letters. This will get you into the factory test menu, and you can format the drive. Once you see the "EA656 DIAGNOSTIC" Screen Menu, press 4 for FLS Utility, 3 for Format Disk C, then ENTER. Once finished, press ESC to back out into the main menu and press 9 to reset and reboot.

FWIW I've done this several times now and I still can't restore to the calculator from any backup.

Ah, OK then ignore my suggestion in your other thread about this, which was to be sure to fully clear/reset the target device before restoring there.

I'd have to agree that the macOS CK is the culprit.

Do you have access to a Windows PC (friend, work, etc.) where you could try it, which would at least confirm your devices are OK, and also verify the macOS CK is indeed the cause?

--Bob Prosperi
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: Restore to hardware calculator broken? - rprosperi - 05-04-2020 08:36 PM

User(s) browsing this thread: 1 Guest(s)