The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 795 - File: showthread.php PHP 7.4.33 (FreeBSD)
File Line Function
/showthread.php 795 errorHandler->error




HP Forums / HP Calculators (and very old HP Computers) / General Forum v / Strange print behavior with HP50 and HP82240B

Post Reply 
Strange print behavior with HP50 and HP82240B
05-16-2020, 08:28 PM
Post: #1
cahlucas Offline
Member
 		Posts: 157
Joined: Mar 2016
Strange print behavior with HP50 and HP82240B
Hi all,
While programming an application, I noticed that there are HP50g calculators that do not print the full 24 characters per line on the infrared printer, using the PR1 command. For my application it is nice if the full 24 characters per line are used. If I run the self-test on the printer, there is no problem, i.e. 24 characters are printed per line. Resetting the printer has also done nothing, the problem is with the calculator. Are there any settings in the calculator that I have overlooked? How can I get the full 24 characters on the printer, regardless of the calculator used? I hope to hear from someone soon. Thanks in advance! Sincerely, Karel.
I use HP-16C, WP-34S emulator, HP-35s, HP-48GX, HP-50g, and HP Prime G2.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Strange print behavior with HP50 and HP82240B - cahlucas - 05-16-2020 08:28 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication