Post Reply 
SwissMicros Announces DM41X Launch
10-10-2020, 08:20 AM (This post was last modified: 10-10-2020 01:52 PM by bernouilli92.)
Post: #83
RE: SwissMicros Announces DM41X Launch
(10-09-2020 07:00 PM)Harald Wrote:  Is the hardware identical for the 42 and 41? I.e. can I flash a 41 to become a 42 and vice versa?
I considered my collection complete and didn't want to buy any more calculators. But I am very tempted now...
Yes, you can do that. That’s what I did to test the dm41x on the dm42 before I received my real dm41x.
You have to put the dm41x firmware and the right KEYMAP.BIN on the FAT usb drive, then you eject the usb drive.
And you can print a dm41x overlay, from this picture :
https://global-uploads.webflow.com/5e3bc...-p-500.png
You have to cut the keys left/up/right. You can cut out the keys that are common, ie ENTER and 0 to 9.

The keymap can be downloaded from here:
https://www.dropbox.com/s/qbvhwkzk41i88y...x.zip?dl=0

You can use the keymap.bin form the dm42 directory to revert to dm42.

And finally, the dm41x firmware is here :
https://technical.swissmicros.com/dm41x/firmware/

You also have to put the files from the DM41X.zip that is here :
https://technical.swissmicros.com/dm41x/fat/
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Question about using .raw files - Namir - 10-05-2020, 08:18 PM
RE: SwissMicros Announces DM41X Launch - bernouilli92 - 10-10-2020 08:20 AM



User(s) browsing this thread: 1 Guest(s)