New update available for Clonix & NoVs users.

[Sylvain Cote]

(01-09-2021 04:52 PM)Sylvain Cote Wrote:  It turn out that I have a hardware problem with the module I was using for testing.
I try the same thing with my other NoV-64d modules and it works.
I will do more tests with this seemingly defect module and will be back with the results.

First, my module is perfectly working, the problem was related to a special configuration that I did to test something for the HPCC presentation.

I spent most of the day doing all kind of tests with three NoV-64d modules, three ClonixConfig versions (4.2 2015, 4.2 2020 & 6.2 2020) and tested on two HP-41 (CX HN & CL FN MMU disabled).
And it turn out that something got broken with the 2020 releases. (4.2 & 6.1)
A NoV-64d programmed as NoV-64d ...

• The default 4100 configuration is now at 000 instead of 100.
• More importantly, the 000 configuration is now equivalent to 200, meaning that there is no way to disable the Flash block mapping anymore.
  

I have not finished the tests for the NoV-64d programmed as Clonix-D, so the results will come later this week.

Sylvain