Sharp PC-1211/TRS-80 PC-1 program tapes from Radio Shack
|
08-09-2021, 08:53 PM
Post: #20
|
|||
|
|||
RE: Sharp PC-1211/TRS-80 PC-1 program tapes from Radio Shack
Hi Valentin,
Quote:This document might be useful. Thanks for the document. Lots of useful information. You're right about the PC-1211 arrays. I'll have to watch for that. Quote:As you can see, this is vastly different from what the PC-1211 allows, so converting a PC-1211 program to run on a PC-1350, say, can be cumbersome and error prone if dealing with arrays, but likely possible. The reverse conversion from PC-1350 to PC-1211 might be extremely difficult, if not outright impossible. Fortunately, all the programs that Dave was nice enough to scan in were for the PC-1211/125x series. At present I am only trying to create basic files that could be run on the 1211/125x/126x and 1350/1360. All of these PC's allow for Variables in the form of A( ). It would be much more difficult to convert the programs to PC-1500/PC-1600 and many of the other PC's if the program made a lot of use of the single array. But I plan to keep an eye out for complications that may occur with the single arrays. Thanks for the PDF and comments. I knew if anyone knew of other problems I might have, it would be you. 73 Bill WD9EQD Smithville, NJ |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)