DM32
|
05-23-2022, 08:36 PM
Post: #48
|
|||
|
|||
RE: DM32
(05-23-2022 04:23 PM)David Hayden Wrote: I've been thinking that it would be fun to create a key presser from one of the robotic kits that are available these days. Funny you should mention that. Many years ago, when I first got my HP-42s, I was frustrated that it could take a while to key in a large program (and not to mention the time to check that it had been keyed in correctly). I thought of using an old flat bed pen plotter. I could cut an opening in the bed of the plotter to hold the HP-42s, maybe put some foam behind it. Then write a program that would take a program listing and then key it into the 42s by moving the pen up/down at the correct locations. I never did try it - I didn't have the plotter. But it should be possible to do with the new robot kits. Of course, now I have the DM42, which can load/save programs very easily. But it would be a fun project to try if I had a robot kit. 73 Bill WD9EQD Smithville, NJ |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
DM32 - Dave Britten - 05-06-2022, 06:43 PM
RE: DM32 - Steve Simpkin - 05-06-2022, 08:04 PM
RE: DM32 - Massimo Gnerucci - 05-06-2022, 08:29 PM
RE: DM32 - Vincent Weber - 05-07-2022, 10:24 AM
RE: DM32 - Vincent Weber - 05-08-2022, 08:30 PM
RE: DM32 - Marco Polo - 05-09-2022, 12:10 PM
RE: DM32 - andylithia - 05-09-2022, 03:47 PM
RE: DM32 - Thomas Okken - 05-09-2022, 04:21 PM
RE: DM32 - Steve Simpkin - 05-09-2022, 05:14 PM
RE: DM32 - Dave Britten - 05-09-2022, 05:39 PM
RE: DM32 - David Hayden - 05-13-2022, 01:47 AM
RE: DM32 - Eric Rechlin - 05-13-2022, 02:33 AM
RE: DM32 - Luigi Vampa - 05-08-2022, 08:13 PM
RE: DM32 - andylithia - 05-08-2022, 11:37 PM
RE: DM32 - Massimo Gnerucci - 05-09-2022, 05:08 AM
RE: DM32 - Steve Simpkin - 05-09-2022, 11:39 AM
RE: DM32 - andylithia - 05-11-2022, 01:56 AM
RE: DM32 - Steve Simpkin - 05-11-2022, 03:39 AM
RE: DM32 - Dave Britten - 05-09-2022, 11:41 AM
RE: DM32 - Steve Simpkin - 05-16-2022, 11:33 AM
RE: DM32 - David Hayden - 05-23-2022, 04:23 PM
RE: DM32 - Bill (Smithville NJ) - 05-23-2022 08:36 PM
RE: DM32 - Vincent Weber - 05-10-2022, 09:48 AM
RE: DM32 - Thomas Okken - 05-10-2022, 02:06 PM
RE: DM32 - Thomas Okken - 05-11-2022, 04:38 PM
RE: DM32 - Marco Polo - 05-10-2022, 02:09 PM
RE: DM32 - Thomas Okken - 05-10-2022, 02:30 PM
RE: DM32 - Marco Polo - 05-10-2022, 03:17 PM
RE: DM32 - John Keith - 05-10-2022, 04:18 PM
RE: DM32 - Thomas Okken - 05-10-2022, 03:25 PM
RE: DM32 - Marco Polo - 05-10-2022, 05:45 PM
RE: DM32 - Thomas Okken - 05-10-2022, 07:27 PM
RE: DM32 - Thomas Okken - 05-11-2022, 11:15 PM
RE: DM32 - Vincent Weber - 05-12-2022, 04:43 AM
RE: DM32 - Eddie W. Shore - 05-12-2022, 12:49 PM
RE: DM32 - Dave Britten - 05-12-2022, 01:33 PM
RE: DM32 - Christoph Giesselink - 05-13-2022, 11:52 PM
RE: DM32 - Dave Britten - 05-25-2022, 11:56 PM
RE: DM32 - Christoph Giesselink - 05-28-2022, 06:16 PM
RE: DM32 - John Keith - 05-29-2022, 05:24 PM
RE: DM32 - DrewNicholson - 05-26-2022, 08:16 PM
RE: DM32 - DrewNicholson - 05-26-2022, 08:32 PM
RE: DM32 - Steve Simpkin - 05-27-2022, 04:29 AM
RE: DM32 - DrewNicholson - 05-27-2022, 01:00 PM
RE: DM32 - Michael de Estrada - 05-30-2022, 08:56 PM
RE: DM32 - Eddie W. Shore - 06-01-2022, 12:22 PM
RE: DM32 - Bill (Smithville NJ) - 06-01-2022, 07:19 PM
RE: DM32 - Eddie W. Shore - 06-02-2022, 02:57 AM
RE: DM32 - Steve Simpkin - 06-02-2022, 03:10 AM
RE: DM32 - Eddie W. Shore - 06-02-2022, 03:27 AM
RE: DM32 - Steve Simpkin - 06-03-2022, 09:48 PM
RE: DM32 - Vincent Weber - 06-04-2022, 06:55 AM
RE: DM32 - Thomas Okken - 06-04-2022, 08:50 AM
RE: DM32 - Vincent Weber - 06-13-2022, 12:25 PM
RE: DM32 - Luigi Vampa - 06-09-2022, 06:55 AM
RE: DM32 - Vincent Weber - 06-14-2022, 05:34 AM
RE: DM32 - Eddie W. Shore - 09-20-2022, 01:47 AM
|
User(s) browsing this thread: 1 Guest(s)